Machines
Brother PE545 vs PE900
Same kind of machine. Different hoop. If the design might pass four inches, buy the PE900.
These two are the embroidery-only Brothers people compare when they do not need the machine to sew. Both are single-needle, both are wireless, both talk to Artspira, both cut the thread automatically, and both carry Brother's 1/2/25 year limited warranty line. The decision is the hoop, then the tools Brother added on the larger machine.
Prices below are the ones on Brother.com on November 18, 2026. The PE545 was on sale. The PE900 was not. We did not stitch on either machine. Owner comments are summarized from public threads, not quoted by name.
Our picks at a glance
The PE900 is first because the hoop is the expensive mistake to avoid. The PE545 is the right buy when every design you care about fits in 4×4.
| Pick | Hoop | Designs | Speed Brother states | Price |
|---|---|---|---|---|
| Brother PE900Best for: Embroidery only, when you want the 5×7 field and fewer thread stops | 5×7 | 193 | Up to 650 spm | $1,179.99Check price |
| Brother PE545Best for: Embroidery only, when every project fits in a 4-inch square | 4×4 | 135 | Up to 400 spm | $429.99Check price |
Price as of Nov 18, 2026; may change. Buttons open the manufacturer page in a new tab.
How to choose between them
Ignore the design count until the hoop is settled. Built-in designs run out. The hoop does not grow.
Write down the largest design you will stitch this year.
If either side is over 4 inches, the PE545 cannot do it in one hooping. The PE900's field is 5 inches by 7 inches, oriented with the included frame at 7 inches high and 5 inches wide.
If every design is inside 4 inches, buy the PE545.
You keep $750 at these prices. Spend part of it on cut-away, tear-away, and 40 wt thread from the supplies guide. A magnetic 4×4 hoop exists (Brother SAMFM100, $301.99 when we checked) and does not make the field bigger.
If you also need to sew, this pair is the wrong pair.
Look at the SE700 for a 4×4 combo and the SE2000 for a 5×7 combo on the beginner guide. If the project is a structured hat, use the hat guide.
Pick 01
Brother PE900
Best for: Embroidery only, when you want the 5×7 field and fewer thread stops
$1,179.99. Brother.com listed price. The page did not show a sale price. Price as of Nov 18, 2026; may change.
Check price at BrotherPick the Brother PE900 when embroidery is the hobby and the hoop is the thing you refuse to regret. Brother lists a 5×7 inch maximum area and one large frame in the box, 18 cm high by 13 cm wide. The product description says speeds up to 650 stitches per minute. Editing on the 3.7 inch display includes letter editing, zoom, resizing, rotating, repositioning, and combining designs.
Two features are the practical difference once the hoop is settled. Color Sort changes the order colors stitch, so a multi-color design can need fewer thread changes. Jump-stitch trimming cuts excess jumps inside a color. Neither feature adds a second needle. You are still standing there with a spool when the color changes. You just do it less.
The page says a 4×7 magnetic frame is easy to hoop because of the 7.4 inches from needle to arm. The carton list is the standard 5×7 frame, bobbins, tools, 90-weight white bobbin thread, and a dust cover. The magnetic frame is a later purchase. We did not find a priced SKU for that exact 4×7 hoop on this pass, so it is not a line in the table.
Pros
- 5×7 inch maximum area. Included frame is 7 inches high by 5 inches wide.
- Described speed up to 650 stitches per minute, against 400 on the PE545 page.
- Color Sort and jump-stitch trimming are listed. The PE545 page does not list them.
- 193 built-in designs and 13 fonts, against 135 designs and 10 fonts.
- 7.4 inches from needle to arm. Artspira drawings can use the full 5×7 field, and Brother says the app includes a stitch simulator.
Cons
- $1,179.99 is $750 more than the PE545 sale price of $429.99.
- Still one needle. You rethread every color.
- Does not sew, and the carton has no foot controller.
- Does not include a cap frame. The magnetic 4×7 hoop is mentioned and is not in the box.
- Listed unit weight 17.64, against 14.07 on the PE545. Brother does not label the unit.
Who it is not for
Sewists who need garment construction from this machine, cap shops, and anyone whose budget stops near $430. It is also the wrong buy if you truly will only stitch names and 3-inch motifs.
- Type
- Embroidery only
- Max area
- 5×7 in (130 × 180 mm in the Artspira line)
- Included frame
- 18 cm high × 13 cm wide
- Designs / fonts
- 193 / 13
- Screen
- 3.7 in LCD
- Transfer
- USB and wireless Design Database Transfer
- Dimensions
- 9.49 × 17.48 × 11.81 in
Sources: Brother PE900 product page.
Pick 02
Brother PE545
Best for: Embroidery only, when every project fits in a 4-inch square
$429.99. Brother.com sale price, from an original price of $499.99 shown on the same page. Price as of Nov 18, 2026; may change.
Check price at BrotherPick the Brother PE545 when the projects are small and you want the money for thread, stabilizer, and designs instead of a larger arm. Brother lists 135 built-in designs, split as 75 motifs and 60 alphabet and frame designs, plus 10 fonts. The included frame is 4×4. The description caps speed at 400 stitches per minute. The sale price was $429.99.
It is not a stripped toy. You still get the 3.7 inch display, finger drag-and-drop, wireless transfer, an advanced needle threader, an automatic cutter, and thread sensors for the top thread and the bobbin. The work area is 6.4 × 4.0 inches. Prewound bobbins in the box are 90 weight, the same weight the PE900 includes.
The regret story is consistent enough to print. On the public PE545 thread, owners praise it for small work. People on the SE630 and SE625, which are the same 4×4 idea with sewing added, say they outgrew the hoop. One PE545 owner with dozens of projects says the small hoop has been fine. Both reports can be true. The question is which projects are yours. If you are already looking up repositional hoops to fake a bigger field, that is the PE900 trying to get your attention.
Pros
- $429.99 on sale, $750 less than the PE900 list price.
- 4×4 inch field is the right size for monograms, labels, and many patches.
- 3.7 inch display with drag-and-drop positioning, which the product page describes as a finger move.
- Wireless, USB, Artspira up to 4×4, automatic thread cutter, upper and bobbin thread sensors.
- Lighter on the spec table (listed unit weight 14.07) and a smaller body: 7.76 × 16.50 × 12.09 inches.
Cons
- 4×4 inches is the ceiling. Owners of this machine and the similar 4×4 SE625 and SE630 split between 'it is enough' and 'I wanted 5×7 fast.'
- Described top speed is 400 stitches per minute.
- No Color Sort and no jump-stitch trimming in the feature list.
- 135 designs and 10 fonts, fewer than the PE900.
- Artspira on this model is described with a pen and an eraser, not the shapes and stitch simulator Brother lists for the PE900.
Who it is not for
Anyone who wants a design larger than 4×4 inches in one hooping, anyone comparing it as a sewing machine, and anyone planning structured caps. It is also a weak buy if you already feel the itch for a bigger field.
- Type
- Embroidery only
- Max area
- 4×4 in (100 × 100 mm)
- Included frame
- 10 cm × 10 cm
- Designs / fonts
- 135 / 10
- Screen
- 3.7 in LCD, drag and drop
- Transfer
- USB and wireless Design Database Transfer
- Work area
- 6.4 × 4.0 in
Sources: Brother PE545 product page; PE545 owner thread.
What is the same
Both are embroidery-only machines for a 110–120 volt, 60 Hz outlet. Both list wireless LAN, a USB port, Design Database Transfer as a free download, Artspira, on-screen editing, a realistic preview, an automatic thread cutter, a quick-set bobbin, an advanced needle threader, and a start/stop button. Both ship with embroidery foot Q, a dust cover, and a 1/2/25 year limited warranty line. Neither page lists a cap frame in the box.
Brother's product pages do not print a file-extension list in the spec tables we used. Both describe USB and wireless transfer, and both point at iBroidery for designs you buy one at a time. We are not adding file types the pages did not print.
What we left out of this comparison
- The SE700 and SE2000. They are the sewing versions of this same hoop choice, and they are on the beginner page so this page can stay a clean pair.
- A star rating. We did not run these machines, and a stitched score would be made up.
- Street prices from dealers. The numbers here are Brother.com. A dealer can be lower tomorrow. The button goes to the manufacturer page so you can see the current number.
Owner threads
These are public conversations, not tests we ran. We do not quote people by name. Owners disagree, and a handful of projects is not a verdict on stitch quality.
Questions people actually ask
Which should I buy, the PE545 or the PE900?
Buy the PE900 if any design you care about is larger than 4 inches, or if you suspect you will want that within the year. Buy the PE545 if your work is names, small motifs, and patches and you would rather keep the $750 difference. Both prices are Brother.com on November 18, 2026: $429.99 on sale for the PE545, $1,179.99 for the PE900.
Does the PE900 sew?
No. Brother sells it as an embroidery-only machine. The carton does not include a foot controller or sewing feet. If you need sewing and a 5×7 hoop, the SE2000 is the combo we priced, at $1,499.99.
Is the PE545 screen a touchscreen?
Brother describes drag-and-drop placement on the 3.7 inch display with the touch of a finger. That is how the page explains positioning. We are using Brother's wording rather than adding a separate touchscreen spec row the table did not print.
Can I put a bigger hoop on the PE545?
The maximum embroidery area is 4×4 inches. A different hoop does not extend the field past what the machine can travel. Owners discussing repositional hoops on a similar 4×4 are trying to split one large design across multiple hoopings, and they describe the alignment as the hard part. If the design is bigger than 4 inches, the PE900 is the simpler fix.
Do owners say they outgrow a 4×4?
Some do, some do not. On a PE545 thread, owners call it easy for small projects, and one person with many projects says the hoop has been fine. People writing about the similar SE625 and SE630 say they wanted a 5×7 soon after starting, or after several years. That split is why this page refuses a single score.
Can either machine embroider hats?
They can embroider a patch you attach to a hat. Brother does not include a cap frame with either machine, and the cap-frame pages we checked name other models. Floating a finished cap in a flat hoop is a workaround some owners describe as fiddly. For caps you will stitch often, use a machine with a documented cap frame.
Related on Hoop Specs
Best embroidery machine for beginners
Adds the SE700 and SE2000 if you also need the machine to sew.
Best embroidery machine for hats
When the PE545 and PE900 are the wrong tools because the hat is the project.
Thread and stabilizer
The $750 you do not spend on a bigger hoop can disappear into the wrong stabilizer. Start here.
Embroidery machine hub
The short version of 4×4, 5×7, and cap frames.