Disclosure: Hoop Specs may earn a commission if you buy through links on this page, at no extra cost to you. No affiliate program is joined yet, so these are plain product links. Notes are from specs, manufacturer pages, and aggregated owner reports, not a lab test. Affiliate disclosure.

Machines

Best embroidery machine for hats

A flatbed hoop does not hold a structured cap. Either stitch a patch, or buy a machine that has a cap frame.

Checked November 18, 2026. Based on manufacturer specs and aggregated owner reviews, including public embroidery threads. Not a hands-on test.

Jump to our picksHow to choose

Search results love to call a Brother PE900 a hat machine. Brother's carton list for it is a flat 5×7 frame. The cap-frame pages we opened name other models. If you want a logo on the front of a structured cap, you need a cap frame and a machine the maker says will run one. If you want a patch sewn or pressed onto the cap, a normal hoop is the better buy.

Owners do float finished caps on sticky stabilizer inside a 4×4 or 5×7 hoop. One public write-up says you line the hat up every time, hold the bill down, and expect more ruined pieces than with patches. A reply says they do the same on a 5×7. We did not try it. Treat it as a fiddly workaround, not as a feature Brother sold you.

Our picks at a glance

The first two machines stitch the cap. The last two stitch a patch you attach. That split is the whole page. It is not a ranked lab test.

Best embroidery machine for hats: comparison of the picks
PickHow it does hatsHoop or cap fieldNeedlesPrice
Brother Persona PRS100Best for: Stitching caps at home on one needle, without jumping to a six-needle commercial headOn the capCap about 5×4.5 in1$3,999.99Check price
Janome MB-4SBest for: Repeating cap logos when you want four thread colors loadedOn the cap, hoop extraHat hoop optional4$7,999Check price
Brother PE900Best for: Hat patches, when you also want a 5×7 hoop for garmentsPatch, then attach5×7 flat1$1,179.99Check price
Brother PE545Best for: Small hat patches, if you are sure you will not want a larger garment designSmall patch only4×4 flat1$429.99Check price

Price as of Nov 18, 2026; may change. Buttons open the manufacturer page in a new tab.

How to choose

Say out loud whether the needle touches the cap.

  1. The needle has to stitch the cap.

    Buy a machine with a documented cap frame. The PRS100 is the single-needle home machine Brother specs for caps, at $3,999.99 before the frame. The MB-4S is the four-needle machine, listed at $7,999, with the hat hoop optional. Get the frame in the quote.

  2. A patch on the cap is fine.

    Then do not pay for a cap frame. If you also embroider shirts, get the PE900 so the 4×4 does not box you in. If every design is a small patch, the PE545 is the smaller spend.

  3. You might float the cap in a flat hoop.

    Owners describe that on sticky tear-away, and they describe mistakes. It is not the same as a cap frame with a bill clamp. If hats are occasional experiments, try it only after you can hoop flat fabric cleanly. Stabilizer types are on the supplies page. The Sulky sampler includes a sticky sheet so you can see that category before you buy a roll.

Pick 01

Brother Persona PRS100

Best for: Stitching caps at home on one needle, without jumping to a six-needle commercial head

$3,999.99. Brother.com price for the machine. The Durkee cap frame is a separate page and did not show a price. Price as of Nov 18, 2026; may change.

Check price at Brother

The Brother Persona PRS100 is the smallest Brother we found that actually says it embroiders caps. The spec table lists cap frame capability, a cap-frame speed range of 400–600 stitches per minute, and a free arm. The machine price on November 18, 2026 was $3,999.99. The included hoops are flat, including an 8×8 class frame at 200 mm square and several compact frames. The cap frame is not in that list.

The cap frame Brother sells for it is the Durkee SACFPRS. The page says you can embroider logos about 5 inches wide by 4.5 inches tall, depending on how stiff the cap is, and that you can embroider the back after the front. Adhesive stabilizer SA5820 or SA5815 is required and is another purchase. Because that frame page showed no price, the machine price is not the hat-ready price. Add the frame and the stabilizer before you compare it with a multi-needle package.

It is a single needle with a large flat field, which is why it also makes sense for sleeves and bags, not only caps. It is a poor beginner machine. There is no Wi-Fi. The listed weight is 68.34. If your logos are two or three colors and you will stitch the same cap all afternoon, the stops to rethread are the reason people step up to the Janome below.

Pros

  • Brother's spec table lists cap frame capability as Yes, and a sewing speed range on cap frames of 400–600 stitches per minute.
  • Free arm. Brother describes it for caps, sleeves, and bags.
  • Maximum embroidery area 8×8 inches, with an included frame of 200 × 200 mm (7-7/8 inches).
  • 445 built-in designs, 21 embroidery fonts, a 7 inch display, and a positioning marker.
  • The Durkee SACFPRS cap frame is sold for this model and is described at about 5 inches wide by 4.5 inches tall, depending on the cap. It can do the back after the front.

Cons

  • The cap frame is not in the box. Brother's SACFPRS page did not list a price, and it requires adhesive stabilizer SA5820 or SA5815 as an extra purchase.
  • Wireless is listed as No. You get a USB cable in the box.
  • One needle. Flat frames run 400–1000 stitches per minute. Cap frames are listed slower, 400–600.
  • The marketing line says an 18 inch wide footprint. The spec table lists unit dimensions of 23.1 × 19.9 × 22.2 inches and unit weight 68.34, with the unit unlabeled. Those two size stories do not match. Measure the spot before you buy.
  • Built-in Disney/Pixar designs are listed as 0. Brother's pitch about character designs on caps points at iBroidery.com, which sells designs individually.

Who it is not for

A first embroidery machine, a sewing machine, or anyone who needs the cap frame included in that $3,999.99. Wireless transfer is not on this model. Every color change is still your hands.

Cap frame
Capability yes; SACFPRS sold separately
Cap field Brother states
About 5 in wide × 4.5 in tall
Max flat area
8×8 in
Needles
1
Designs / fonts
445 designs, 21 fonts
Wireless
No
Warranty line
2/6/25 year premium limited

Sources: Brother PRS100 product page; Durkee SACFPRS cap frame.

Pick 02

Janome MB-4S

Best for: Repeating cap logos when you want four thread colors loaded

$7,999. Price printed on Janome.com, which also says to see a dealer for pricing. A dealer quote can differ, and a package is not the same as the machine. Price as of Nov 18, 2026; may change.

Check price at Janome

The Janome MB-4S is the hat machine for someone who already knows they will change colors all day. Four needles hold four threads. A one-needle machine, including the PRS100, stops at every color. Janome lists speeds up to 800 stitches per minute, a large flat field, and compatibility with .jef+, .jef, and .dst. The price printed on the product page is $7,999, next to the words 'Please see Dealer for pricing.'

The hat hoop is the part people skip. Janome's key features say 'Hat Hoop: Optional.' The instruction book lists H1 as a flat hat hoop, 100 × 90 mm, under optional socks and hat hoops, next to Tajima hoops that are also optional. The standard accessories in that book are the M1 (240 × 200 mm), M2 (126 × 110 mm), and M3 (50 × 50 mm) hoops. If the quote does not name a hat hoop, you do not own one yet. Confirm the stitch field on that hoop before you promise a 4-inch-tall cap design. We are using Janome's manual figure, not a dealer blurb.

There is a spec mess worth seeing with your own eyes. The key features say 9.4 × 7.9 inches and 238 × 200 mm. Another row on the same page says 238 × 230 mm. The manual's M1 hoop is 240 × 200 mm. Those cannot all be the stitch field. The safe reading is the included large hoop in the manual. This machine also will not construct a shirt. It embroiders.

Pros

  • Four needles, so a typical two- to four-color cap logo can run without a manual color change at every stop.
  • Janome lists a maximum embroidery size of 9.4 × 7.9 inches (238 × 200 mm) in the key features, and included hoops M1, M2, and M3.
  • The product page says the hat hoop is optional. The instruction book lists an H1 flat hat hoop at 100 × 90 mm under optional socks and hat hoops.
  • Formats Janome prints: .jef+, .jef, and .dst. Speed up to 800 stitches per minute.
  • Auto return after a thread break, programmable jump trimming, and a 5.7 inch remote screen.

Cons

  • Janome.com prints $7,999 and tells you to see a dealer. Do not treat a package price that includes a cabinet as the same number.
  • The hat hoop is not in the standard accessory list in the instruction book. Budget for it, and confirm the field on the exact SKU. A flat hat hoop still means the cap is pushed down onto the frame.
  • One spec row on the same Janome page says 238 × 230 mm, which does not match the 238 × 200 mm key-feature line or the 240 × 200 mm M1 hoop in the manual. Use the hoop you will actually own.
  • It does not sew. Machine weight is listed as 45.2 pounds. Size is W 14.4 × H 25.2 × D 20.5 inches.
  • Fifty built-in designs and 10 fonts. You will be bringing your own logo files in the formats Janome lists.

Who it is not for

Beginners, anyone who needs a sewing machine, and anyone without a sturdy table. The hat hoop is optional. This is a 45.2 pound, 25.2 inch tall embroidery machine, not a kitchen-counter PE900.

Needles
4
Max field Janome highlights
9.4 × 7.9 in (238 × 200 mm)
Hat hoop
Optional. Manual lists H1 at 100 × 90 mm
Formats listed
.jef+, .jef, .dst
Speed
Up to 800 spm
Weight
45.2 lb
Screen
5.7 in remote screen

Sources: Janome MB-4S product page; MB-4S instruction book (hoop list).

Pick 03

Brother PE900

Best for: Hat patches, when you also want a 5×7 hoop for garments

$1,179.99. Brother.com listed price for the machine. It does not include a way to hoop a structured cap. Price as of Nov 18, 2026; may change.

Check price at Brother

Buy the Brother PE900 for hats only if 'hat' means a patch. The 5×7 hoop gives you room for the patch and for the shirt designs that make a 4×4 feel small a month later. Brother's price was $1,179.99. The full beginner case for this machine is on the beginner guide, and the head-to-head with the smaller hoop is PE545 vs PE900.

Attaching the patch is a separate craft. Some shops sew the patch down. Some use a heat seal. We are not recommending a heat press or a patch film here, because we did not price those products on this pass. The point is simpler: the PE900 never has to hold the curved cap.

Pros

  • 5×7 inch field is enough for a patch and for garment designs that do not fit in 4×4.
  • You stay at $1,179.99 instead of a multi-thousand-dollar cap machine.
  • A finished patch can go on a cap, a jacket, or a bag. One design, more than one product.
  • Wireless transfer, 193 built-in designs, and a described speed up to 650 stitches per minute.

Cons

  • No cap frame in the carton, and we did not find this model on the Brother cap-frame pages we opened.
  • You still have to attach the patch. That is a second step, with sewing or a heat-seal product we have not priced here.
  • Single needle. Color changes are manual, with Color Sort to reduce some of them.
  • It does not sew the garment either. Embroidery only.

Who it is not for

Anyone who needs the design stitched on the structured cap itself. Also a weak hat-only buy: if you will never stitch anything bigger than a patch, the cheaper PE545 covers that patch.

Hat method
Patch on a flat hoop
Max area
5×7 in
Needles
1
Cap frame in box
No
Price checked
$1,179.99

Sources: Brother PE900 product page.

Pick 04

Brother PE545

Best for: Small hat patches, if you are sure you will not want a larger garment design

$429.99. Brother.com sale price, from $499.99 shown on the same page. Price as of Nov 18, 2026; may change.

Check price at Brother

The Brother PE545 earns a place on a hat page because a cap patch is often small. Brother's field is 4×4 inches, on sale at $429.99. If the patch is the only embroidery you will do, paying for a 5×7 or a cap frame is optional.

Do not buy it as a starter hat business. Owners who float a cap on sticky tear-away inside a 4×4 say placement has to be checked every time, the bill has to be held down, and a larger hoop can collide with the hat when the machine moves. That is their report, not a method we tested. Brother does not list a cap frame for this model. The compatible magnetic hoop we did price, the SAMFM100 at $301.99, is still a 4×4. It does not turn the machine into a cap machine.

Pros

  • Sale price $429.99, the cheapest way on this page to stitch a patch.
  • 4×4 inches (100 mm) covers a lot of cap-front artwork, because the cap front itself is a small field.
  • Wireless, a 3.7 inch display, and 135 built-in designs.
  • Light enough to put away. Listed unit weight 14.07, unit not labeled on the page.

Cons

  • Not a cap-frame machine. Floating a finished hat in this hoop is the workaround owners call easy to mess up.
  • You will feel the 4×4 the first time the design is for a shirt, not a patch.
  • Described speed tops out at 400 stitches per minute.
  • Embroidery only, single needle, no Color Sort in the feature list.

Who it is not for

Structured caps, and anyone using 'I might do hats' as the reason to buy a 4×4 they will outgrow on shirts. A cap logo often fits in 4 inches. A chest design often does not.

Hat method
Small patch on a 4×4 hoop
Max area
4×4 in
Needles
1
Cap frame in box
No
Price checked
$429.99 sale

Sources: Brother PE545 product page; Owner notes on floating a hat in a 4×4.

What a cap field actually fits

Cap fronts are curved and the bill is in the way, so the stitch area is smaller than a flat hoop of the same machine. Brother's Durkee frame for the PRS100 is described at about 5 inches wide by 4.5 inches tall, and Brother says that depends on the cap. Janome's manual lists the optional flat hat hoop at 100 × 90 mm, which is about 3.9 × 3.5 inches. A design drawn for a 5×7 shirt hoop will not automatically fit either of those frames. Resize the file to the frame you own.

What we left out

  • Brother PR680W. The spec table lists cap frame capability, six needles, a 12×8 inch area, wireless, and speeds up to 1,000 stitches per minute. The product page did not show a price. The cap-frame set pages we opened (PRCF3 and PRCFH3) do not name the PR680W. We left it out rather than guess a frame or a price. PR680W page.
  • Brother SE700 and SE2000. They are flatbed combo machines. Useful if you need to sew, not a cap-frame answer. They are on the beginner guide.
  • Brother SE1900. Discontinued and out of stock at $989.99 on the page we opened, and the spec table says cap frame capability is NA.
  • Generic 'hat hoops' marketed for flatbed home machines when the maker does not list that model. We did not find a Brother cap frame for the PE545, PE900, SE700, or SE2000.
  • Janome MB-7. It is the seven-needle sibling of the MB-4S. We did not open a current priced product page for it, so it is not a pick.

Owner threads

These are public conversations, not tests we ran. We do not quote people by name. Owners disagree, and a handful of projects is not a verdict on stitch quality.

Questions people actually ask

Can I embroider a baseball cap on a Brother PE900 or PE545?

Not with a cap frame Brother includes or lists for those models. Both ship with flat hoops. You can stitch a patch and attach it. Some owners float a finished cap on sticky stabilizer in a flat hoop and say it is easy to mess up. For caps you stitch often, use a machine with a documented cap frame, such as the PRS100 or the MB-4S with its optional hat hoop.

What is the difference between a patch and stitching the cap?

A patch is embroidery on flat fabric or patch material, held in a normal hoop, then sewn or sealed onto the hat. Stitching the cap means the cap is clamped in a cap frame and the needle sews the front of the hat. The second job needs a machine built for that frame. The first job can be done on a beginner flatbed.

How big a design fits on a hat?

Smaller than a shirt hoop. Brother describes the Durkee frame for the PRS100 at about 5 inches wide by 4.5 inches tall, depending on the cap. Janome's MB-4S manual lists the optional flat hat hoop at 100 by 90 mm. Check the frame in your quote before you digitize a design to a shirt-sized hoop.

Does the Brother PRS100 include the cap frame?

No. The $3,999.99 carton list we read is flat frames, compact frames, and tools. The Durkee SACFPRS is a separate product. Its page did not show a price, and it calls for adhesive stabilizer SA5820 or SA5815 as an additional purchase.

Is the Janome MB-4S a beginner machine?

No. Janome lists it at $7,999, at 45.2 pounds, with four needles and an optional hat hoop. It does not sew. It belongs on this page because of the hat hoop and the color changes, not because it is a first machine. A first hoop is the beginner guide.

What stabilizer do I need for hats?

Brother says the PRS100 cap frame requires adhesive stabilizer SA5820 or SA5815. For ordinary patches on a flat hoop, use the same stabilizer choice as any other fabric: cut-away for knits, tear-away for stable wovens. The supplies guide has priced Sulky rolls and a sampler that includes a sticky sheet.

Related on Hoop Specs

PE545 vs PE900

The patch machines, compared on hoop size instead of hats.